Simple instructions for applying stickers

So, you've got some great vinyl stickers and now you want to apply them to different surfaces? Don't worry, applying vinyl stickers is a simple task. In this guide, we'll show you step by step how to apply your vinyl stickers correctly and permanently.

Preparation
Make sure the surface you want to apply the sticker to is clean, dry, and free of dust and dirt. If necessary, use cleaning agents to thoroughly clean the surface. Make sure the surface is smooth to ensure optimal adhesion of the sticker.

positioning
Carefully place the vinyl sticker on the desired location and consider whether you want to apply it straight or at an angle. Experiment with different positions to achieve the best result. You can also temporarily secure the sticker with masking tape to check the exact positioning before applying it permanently.

Attach
Once you've found the perfect position, begin peeling the sticker from the backing film. Start at a corner and peel the film back slowly and evenly, smoothing the sticker onto the surface. Use your fingers or a squeegee to remove any air bubbles and smooth the sticker evenly.

Printing and adhesion
After fully applying the vinyl decal to the surface, press firmly to ensure proper adhesion. Use your fingers or a squeegee, going over the decal several times to ensure it adheres well to the surface.

Removing the transfer film
Some vinyl decals come with a transfer film, which is used during application to protect the decal and facilitate positioning. Once the decal is firmly adhered to the surface, carefully peel off the transfer film. Make sure the decal stays on the surface and doesn't peel off with the transfer film.

Done! You've successfully applied your vinyl sticker. Admire your work and enjoy the unique design you've achieved.

Final tips:

• If you are applying the sticker to a curved surface such as a glass or bottle, work slowly and gently smooth the sticker out from the center to avoid wrinkles and bubbles.
• Avoid cleaning the sticker with water or detergents immediately after application.